-----------------------  /var/sysgen/master.d/scsi  --------------------

(Note: I simply replaced my "EXABYTE8500" entry with the following entry.)


	{ EXABYTE8500, TP8MM_8500, 7, 8, "EXABYTE", "EXB8500C", 6, "\40\4\16\0\200\7", 
		{0x15, 0x14, 0x8C, 0x90},
	  MTCAN_BSF|MTCAN_BSR|MTCAN_PREV|MTCAN_CHKRDY|MTCAN_VAR|MTCAN_SETSZ|
	    MTCAN_SILI|MTCAN_CHTYPEANY|MTCAN_SETDEN|MTCAN_SPEOD|MTCAN_SYNC|
		MTCAN_SEEK,
	  80, 4*60, 25*60, 5*60, 1024, 128*1024},

-----------------------         /dev/MAKEDEV        ---------------------

(Note: There are two ways of setting up your MAKEDEV entries depending on
whether you like the "c" after the density specification (e.g. tps0d1.8500c)
or prior to period as we do (e.g. tps0d1nrnsc.8500).  In either event, the
mods are simple and here they are for the SCSI controllers only.  I have
not included mods for the Jag controller because we do not use them.

Search for the line "tps: anything" in your favorite editor.

Case 1 mods ("c" after density)

	Insert the following entry prior to the "*Drive?type:*8mm?8500*)" line:

		*Device*8500C*) \
		    rm -f $${prf}nr ; \
		    set s nrs ns "" nrns nr sv nrsv nsv v nrnsv nrv ; \
		    for add in 0 1 2 2 3 3 4 5 6 6 7 7 ; do \
			mdev=`expr $$minor + $$add`; \
			mknod $${prf}$$1 c ${C_TPS} $$mdev; \
			shift; \
		    done; \
		    for dens in 0 8 16 24; do \
			case $$dens { \
			0) kden=8500;; \
			8) kden=8200;; \
		       16) kden=8500c;; \
		       24) kden=8200c;; \
			}; \
			set s nrs ns "" nrns nr sv nrsv nsv v nrnsv nrv ; \
			for add in 0 1 2 2 3 3 4 5 6 6 7 7 ; do \
			    mdev=`expr $$minor + $$add + $$dens`;\
			    mknod $${prf}$$1.$$kden c ${C_TPS} $$mdev;\
			    shift;\
			done; \
		    done ;; \

Case 2 mods ("c" prior to period)

	Insert the following entry prior to the "*Drive?type:*8mm?8500*)" line:

		*Device*8500C*) \
		    rm -f $${prf}nr ; \
		    set s nrs ns "" nrns nr sv nrsv nsv v nrnsv nrv ; \
		    for add in 0 1 2 2 3 3 4 5 6 6 7 7 ; do \
			mdev=`expr $$minor + $$add`; \
			mknod $${prf}$$1 c ${C_TPS} $$mdev; \
			shift; \
		    done; \
		    for dens in 0 8 ; do \
			case $$dens { \
			0) kden=8500;; \
			8) kden=8200;; \
			}; \
			set s nrs ns "" nrns nr sv nrsv nsv v nrnsv nrv ; \
			for add in 0 1 2 2 3 3 4 5 6 6 7 7 ; do \
			    mdev=`expr $$minor + $$add + $$dens`;\
			    mknod $${prf}$$1.$$kden c ${C_TPS} $$mdev;\
			    mdev=`expr 16 + $$minor + $$add + $$dens`;\
			    mknod $${prf}$$1c.$$kden c ${C_TPS} $$mdev;\
			    shift;\
			done; \
		    done ;; \